Product ID:FLEXFRAM 605 NS PART A
MSDS Date:01/11/1995
FSC:8030
NIIN:00-097-9088
Kit Part:Y
MSDS Number: CFSXV

FIBER MATERIALS INC

5 MORIN STREET
BIDDEFORD, ME 04005-4497
US

Emergency Phone: 800-535-5053

Info Phone: 207-282-5911

Cage: 62500

FIBER MATERIALS INC

BIDDEFORD, ME 04005 US

Telephone: 207-282-5911

Cage: 62500

TRIETHYLENETETRAMINE; (TETA)

CAS: 112-24-3

RTECS: YE6650000

OSHA PEL N/K

ACGIH TLV: N/K

SILICA, AMORPHOUS FUMED

CAS: 112945-52-5

RTECS: VV7310000

OSHA PEL 6 MG/M3

ACGIH TLV: 10 MG/M3

1); (ALUMINOSILICATE FIBER,

CAS: 1302-76-7

RTECS: BD1450000

OSHA PEL N/K

ACGIH TLV: N/K

AMIDOAMINE RESIN

CAS: 68443-08-3

OSHA PEL N/K

ACGIH TLV: N/K

RELEVANT EXPERIMENTAL DATA ON MAN MADE MINERAL

RTECS: 9999999ZZ

CAUSING PTNTL OF THESE MATLS. BASED ON ITS REVIEW,

RTECS: 9999999ZZ

ROCK WOOL & SLAG WOOL) & CERAMIC FIBER AS GROUP 2B

RTECS: 9999999ZZ

TO HUMANS. FOR REFRACTORY CERAMIC FIBERS, IARC'S 2B

RTECS: 9999999ZZ

CARCIN IN EXPERIMENTAL ANIMALS IN ABSENCE OF HUMAN

RTECS: 9999999ZZ

PLANNED. PENDING RSLTS OF THESE STUDIES, STRICT

RTECS: 9999999ZZ

THIS DATA SHEET IS ADVISED.

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SIGNS & SYMPS OF EXPOS: IRRIT OF SKIN,
DERM, BURNING OF EYES, OVEREXP COULD CAUSE IRRIT OF RESP TRACT.
SEVERE EYE IRRITANT, RATED 105 IN 0-110 RANGE, RABBIT. MODERATE
SKIN IRRITANT. REMOVAL OF CURED M ATL BY GRINDING MAY RSLT IN
SUSPENDING SILICA DUST AND NUISANCE DUST IN AIR. PRODUCT CONTAINS
(EFTS OF OVEREXPOSURE)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZS:ALUMINOSILICATE WHICH COULD TRANSFORM
UPON HEATING TO MULLITE AND CRISTOBALITE (FORM OF CRYSTALLINE
SILICA). REMOVAL OF THIS PROD AFTER USE MAY RSLT IN GENERATION OF
DUST. REPEATED INHAL OF RESPIRABLE FREE CRYSTALLINE SILICA DUSTMAY
CAUSE DELAYED LUNG INJURY(SILICOSIS). PULMONARY TUMOR CAUSING PTNTL
(SUPDAT)
Medical Cond Aggravated by Exposure:ASTHMA, SENSITIZATION DERMATITIS.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES AND CALL PHYSICIAN.
INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE OXYGEN/ARTIFICIAL RESPIRATION) . SKIN: FLUSH W/C
OPIOUS AMOUNTS OF WATER. CALL MD .

Flash Point Method:COC
Flash Point:365F,185C
Extinguishing Media:WATER, CO*2, DRY OR FOAM.
Fire Fighting Procedures:USE NIOSH APPRVD SCBA & FULL PROT EQUIP . FOR
LARGE FIRES, USE WATER SPRAY, FOG, OR FOAM. DIKE WATER RUN-OFF.
PREVENT ENTRY INTO SEWERS/NATURAL WATERS.
Unusual Fire/Explosion Hazard:TOXIC FUMES WILL BE EVOLVED IF UNMIXED
MATERIAL IS INVOLVED IN A FIRE.

Spill Release Procedures:DIKE. USING RECOMMENDED PROTECTIVE EQUIPMENT,
SCOOP UP AND CONTAINERIZE. FLUSH AREA WITH DILUTE (5%) ACETIC ACID.
GUARD AGAINST FIRE HAZARD IF SOLVENTS ARE USED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN TIGHT, STURDY CONTAINERS IN A
DRY LOCATION. HANDLE IN ACCORDANCE WITH HAZARD POTENTIAL.
Other Precautions:REMOVE CONTAMINATED CLOTHING AND PROTECTIVE GEAR.
DECONTAMINATE. DESTROY LEATHER ARTICLES, INCLUDING SHOES THAT
CANNOT BE DECONTAMINATED.

Respiratory Protection:NIOSH APPROVED RESPIRATORY PROTECTION WITH
ORGANIC VAPOR CARTRIDGES AS REQUIRED TO PREVENT VAPOR OVEREXPOSURE.
Ventilation:LOCAL EXHAUST:NECESSARY IN CONFINED MIXING AND APPLICATION
AREAS. MECHANICAL(GENERAL):REQUIRED TO PREVENT OVEREXPOSURE.
Protective Gloves:RUBBER GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:AVOID SMOKING, EATING, AND DRINKING IN WORK
AREA.
Supplemental Safety and Health
EFTS OF OVEREXP: OF REFRACTORY CERAMIC FIBERS IN ANIMALS IS UNCLEAR.
TWO INHAL STUDIES SUGGEST LOW ORDER PTNTL IN INDUCING PULM TUMORS
IN ANIMALS, WHILE OTHER INHAL & INTRATRACHEAL INJECTION STUDIES C
ONCLUDE THAT CERAMIC FIBERS ARE NOT TUMORIGENIC IN ANIMALS. IARC
HAS RECENTLY REVIEWED ANIMAL, HUMAN & OTHER (ING 5)

Spec Gravity:1.136
Evaporation Rate & Reference:N/A (BUTYL ACETATE=1)
Solubility in Water:MODERATE
Appearance and Odor:AMMONIACAL, MERCAPTAN.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, CHLORINATED ORGANIC COMPOUNDS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:HEATING TO DECOMP MAY PRODUCE QTIES OF
FREE SILICA(CRISTOBALITE).
Conditions to Avoid Polymerization:REACTS WITH CONSIDERABLE HEAT WITH
HOT RESINS.

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.